Tecnical Specification (MM)
	S. N. Parts Specification Medium 4' 6" Medium 5' 3" Medium 6 1 Bed Length of Bed Width of Bed Length of Gap Length of Gap in Front of Face Plate 4' 6" (1370mm) 11 " (280mm) 5" (127mm) 5" (127mm) 5' 3 "(1600mm) 11 " (280mm) 5" (127mm) 5" (127mm) 6' (1830mm) 11 " (280mm) 5" (127mm) 5" (127mm) 2 Capacity Height of Centre Admit between center Movement of cross slide Movement of comp. slide 8II (215mm) 20" (508mm) 6.75 (170mm) 5 " (127mm) 8II (215mm) 29" (740mm) 6.75 (170mm) 5 " (127mm) 8II (215mm) 38 " (965mm) 6.75 (170mm) 5 " (127mm) 3 Main Spindle Spindle Nose Spindle Bore Tapper Bore 75mm x 6 TPI 2 1/8 " (55mm) MT - 4 75mm x 6 TPI 2 1/8 " (55mm) MT - 4 75mm x 6 TPI 2 1/8 " (55mm) MT - 4 4 Tail Stock Spindle Diameter Morse tapper Travel 2" (50.8mm) MT - 4 6' (152mm) 2" (50.8mm) MT - 4 6' (152mm) 2" (50.8mm) MT - 4 6' (152mm) 5 Speed No. of speed RPM Low & High 6 45 to 450 6 45 to 450 6 45 to 450 6 Threads Metric thread Inch thread Lead screw M 1 to 6 2 to 24 1I" (31.75mm) M 1 to 6 2 to 24 1I" (31.75mm) M 1 to 6 2 to 24 1I" (31.75mm) 7 Electric Motor Power 2 H.P III 2 H.P III 2 H.P III 8 Drive Counter to spindle Counter to motor B - 48 x 2 no. B - 57 x 2 no. B - 48 x 2 no. B - 57 x 2 no. B - 48 x 2 no. B - 57 x 2 no. 9 General Floor space (L x W x H) 65" x 39" x 55" 76" x 39" x 58" 84" x 39" x 55"
	STANDARD ACCESSORIES
	Chuck Plate, Change Gear Set, Tool Post Key, Dead Centers, Center Adaptor, Motor Pully.
	Note :	Any Altertoin in respect of ourstd. specifiction will be welcomed at extra cost. As improvements are constantly made in our machine the above specification, dimension and weight are subject to change without notice & are not binding on us.